3 Reasons Why Carb Spitting Fuel Into Air Filter : [Visual Guide!]
A Carb Spitting Fuel Into Air Filter can be quite troublesome for owners. While your mower or motorcycle will still run, the engine performance will be poor. The gas will also run out very quickly.
Understanding the cause of this problem is the first step to resolving it, so why is the carburetor spitting fuel into the air filter? Well, here are some potential causes:
- Dirty carburetor
- Damaged carburetor float
- The carburetor float being stuck open
You may need to replace, clean, or rebuild certain carburetor parts to resolve the issue of carb spitting into the air filter. Keep reading to learn and understand this process more in-depth.
easy Troubleshooting guide for carb spitting fuel into air filter problems
Now that you know the causes of today’s issue, it’s time to learn the fixes in more detail. So, let’s get right into it!
1. Dirty Carburetor
The carburetor is made out of a few essential components, such as the float, the float bowl, the valve needle, the seat, and the jet. If the carburetor is left sitting without gas for a long time, it can get clogged up.
Usually, the jet or the needle- seat are the main places a carburetor can get clogged. Built-up gunk and grime can prevent the float from working properly.
Or to stay shut open or closed. And this eventually leads the fuel to overflow through the air intake.
how to fix Dirty Carburetor issues?
The only fix for this issue is to clean the carburetor. Follow these steps to do so:
- Step 1- Take out the carburetor: The carburetor cannot be cleaned while it’s still attached to the engine, so take it apart before beginning the cleaning.
- Step 2- Detach the carburetor bowl: To access the inside of the carburetor, detach the bowl. Simply take out the four screws from the bottom to take it off.
- Step 3- Clean the carburetor: Now, take your preferred dedicated carburetor cleaner and clean the dirt, debris, or built-up grime. Be sure the grime to be cleaned using a cloth before spraying.
A good carb cleaner can range from $10-30, depending on the brand. You can try out this carburetor cleaner from Amazon!
2- Damaged carburetor float
The carburetor float is a small flap that opens and shuts to maintain an accurate fuel flow, similar to how a toilet water hold works. If the float is damaged and stays open or shut, the fuel will overflow through the air intake.
This is mainly because the air intake is the closest neighbor of the carburetor.
how to Fix Damaged carburetor float?
The only way to fix this issue is to replace the carburetor float. And to do that, follow these steps:
- Step 1- Take out the carburetor: To gain access to the carburetor float and replace it, you must remove the carb from the engine.
- Step 2- Remove the carburetor bowl: The float is located inside the carburetor; simply remove the bowl to access it.
- Step 3- Remove the holding pin: The float is kept in place using a holding pin. Take it out to detach the damaged float.
- Step 4- Add the new float: Attach the new float to the carburetor. Don’t forget to attach the valve needle while doing so!
- Step 5- Attach the holding pin: To lock the new float in place, use the holding pin.
Just that simply, you have now attached a brand new carburetor float. Small engine floats usually cost around $9 on Amazon.
3. Carburetor float being stuck open
The carburetor float being stuck open is one of the most common reasons why the carb may leak fuel into the air filter.
When stuck open, the carburetor fuel can easily overflow and make its way down to the air filter. But the fuel can also leak into the engine!
Here are some reasons why the float may be stuck open:
- Faulty valve needle
- Faulty valve needle seat/o-ring
- Damaged float
- Dirty carburetor
how to Fix Carburetor float being stuck open?
As we’ve already discussed the fixes for a dirty carburetor and a damaged float, let’s discuss the other two issues and learn the fixes!
#1. Faulty valve needle
A faulty valve needle must be replaced. And to do that, just grab a fresh valve needle and follow these steps:
- Step 1- Remove the float: The valve needle sits right under the float. Remove the float to gain access to it.
- Step 2- Pull out the valve needle: Simply pull out the valve needle using your fingers.
- Step 3- Add a new valve needle: Add a new valve needle into the needle seat. Make sure the seating o-ring is healthy!
#2. Faulty valve needle seat/o-ring
Right where the valve needle sits, there’s a small o-ring. A damaged seat can also cause the float to be stuck open. So, here’s how to replace it:
- Step 1: Take out the float: Like before, remove the float from the seat and the valve needle. Step 2: Remove the damaged o-ring: Take a small pick and remove the old o-ring from the seat.
- Step 3: Add a new o-ring: Take the new o-ring and push it inside the seat.
- Step 4: Add the valve needle and float: Put the valve needle back in place and re-attach the float.
That’s it! You’re done. Remember that the valve needle may already have an attached rubber that acts as the O-ring for some seats. In that case, you may have to replace the whole valve needle.
Read find out WHY Mower Deck Digging Into Ground [Causes + Fixes!]
Can you continue using your lawnmower?
Yes, you can continue using your lawnmower even if the carb spits fuel into the air filter. However, it will be a difficult experience. Mainly because this issue will cause a large amount of gas leakage.
Liquid gas will leak out of your lawnmower, leading to poor engine performance. In the long run, this will cost you much more money as fuel will run out quickly. The engine may also suffer damage due to internal gas leaks.
What Happens if a Carburetor Spits Fuel into the Air Filter?
If the carburetor spits fuel into the air filter, it can mean a few things. Mostly all related to the gas making its way into places such as:
- The engine
- The engine oil
If you notice your engine oil being full or can smell gasoline, it can mean the carburetor leak has made its way into other parts of your mower, bike, or ATV. This can mess with the engine oil lubrication, causing poor engine performance.
FAQ about lawn mower gas pouring out of carburetor
Here are some frequently asked questions. These questions are related to Carb Spitting Fuel into Air Filter and will help round up today’s topic!
Will a gas leak from the carburetor damage the air filter?
If the carburetor leaks gas into the air filter, it may cause clogs in the air filter. However, this is easily resolvable by taking out the air filter and cleaning it. The gas leak must be resolved to avoid further problems.
Do you need to replace a carburetor to fix a gas leak?
If the carburetor seems to be damaged, you may have to replace it to fix additional issues, including a gas leak. However, simple gas leaks rarely indicate a damaged carburetor. The problem may be in a dirty carb or damaged float.