6 Reasons Mower Deck Digging into Ground [ Fixes!]
Using a lawn mower is no easy task. Sometimes it becomes even more problematic due to the Mower Deck Digging into Ground while operating. This is something that can be easily fixed but it’s important to understand why it digs into the ground in the first place.
Some of the common reasons for the lawn mower deck digging into the ground include:
- Deck Height
- Terrain surface
- Damaged blades
- Excessive weight
- Pressure on the tire
- Mowing technique
These are the factors that can easily impact the problem, especially the uneven terrain. Any unexpected bumps in the soil may cause the mower to dig in and get stuck. The only solution in this regard is to slow down and gently mow the uneven area.
What is a Mower Deck?
A mower deck is also known as a cutting deck or mower housing. It is where the cutting blades of the lawn mower are housed.
The mower deck attaches to the main body of the lawn mower and protects the user from the blade. It also channels out the discharged grass through a side chute or a rear bag.
A mower deck is essential in the sense that it not only protects the user against accidents but also ensures that the grasses are cut evenly as per the required limit.
Read also: 3 Reasons Lawn Mower Runs For 5 Minutes Then Dies [Solved]
How does a mower deck work?
A mower deck is essentially like a covering of the internal blade movement of the lawn mower. So its primary function is to protect the user from accidents as well as prevent spillage of the discharged grass.
Turning on the mower would initiate the blade rotation inside the deck. Depending on the settings, this rotation can be low to high. As the lawn mower moves forward, the blades create a suction force inside the deck.
This creates a negative pressure which in turn drives the grass towards the blades. Depending on the height setting of the mower, the grass would be cut to a specific height.
After that, the deck directs the discharged grass to the side chute or a collecting bag. To know more about the working process of mowers, check out this video.
Should mower deck wheels touch the ground?
The mower deck wheels should touch the ground in the sense that the wheels are there to maintain contact with the ground to ensure an even cut. However, depending on the cutting length, the height of the deck wheels should be adjusted.
For example, if a wheel is not adjusted in uneven terrain, it will cause the mower to scalp the grass at certain places leaving bald patches in the grass.
To avoid this problem, generally, the wheel should be maintained at a height of 0.25 to 0.5 inches from the ground.
This applies to even terrains. For uneven surfaces, follow the user manual or select a height based on your grass-cut preference.
Troubleshooting guide for mower deck digging into ground problems
As mentioned already, there are several reasons why the mower deck might dig into the ground. Let’s troubleshoot some of them and talk about the potential fixes.
1. Uneven Terrain
Depending on the model of your mower, it might be suitable for uneven terrain. There are large-scale industrial-grade mowers that can work on every terrain.
But in most cases, suburban houses use hand-operated lawn mowers which are much cheaper and easier to maintain. They also seem to get the job done pretty well.
However one of the downsides of such a mower is that they tend to dig into the ground in case of uneven terrain. Some other symptoms include –
- Grazed soil
- Scalped patches of grass where the soil is uneven
- Uneven grass length after mowing
Potential Fix:
There are several ways to fix the problem related to uneven terrain. It is important to understand that the problem of uneven terrain has nothing to do with the mower itself. Regardless, you could consider the following fixes.
- Slow down the mower when approaching an uneven plain. This will help to avoid scalping the grass.
- Check whether the uneven terrain is widespread or not. If it is on a small area, try adding extra soil to level out the uneven areas.
- If you are in the market for upgrading the mower, then consider getting a mower with a floating deck or a suspension system that can easily work around uneven terrain.
Important video link: How to Fix a Mower that Cuts Uneven – YouTube
2. Damaged Blade
Another reason why the mower deck might dig into the ground is because of a damaged or dull blade.
A dull blade causes uneven growth which might not be aesthetically pleasing. There are some telltale signs of damaged blades like –
- The blade fails to evenly cut the grass
- In some cases, the grass doesn’t cut to the desired length
- The excessive pressure to cut the grass might push the deck into the ground
Potential Fix
The fix here is to sharpen the dull blade. It can be done in the following way.
- Use a bench grinder, a file, or a professional blade sharpener to sharpen the blade edges.
- Always install the blades at the correct angle as per the guide manual.
- Replacing the blade.
The cost of replacing might range anywhere between 15 to 50 USD depending on the blade size and the model of the mower. Regular maintenance of the blades would help to avoid the mower deck from digging into the ground.
3. Mowing technique
Sometimes the mowing technique may also be the reason why the mower deck digs into the ground.
This might happen because
- An unbalanced move of the mower would shift the blade excessively on one side resulting in the deck digging into the ground.
- Excessive downforce or pressure on the hand mower may also cause the deck to dig into the ground.
Potential Fix:
Solving this issue would require an overhaul of the mowing technique. Here are some techniques that will prevent the deck from digging into the ground.
- Practice smooth and controlled mowing techniques.
- Avoid sharp turns or sudden changes in direction, especially when mowing on slopes or uneven ground.
- Use gradual turns and overlap slightly with each pass to ensure an even cut.
You can check out this video on ideal mowing techniques to get an idea about the dos and don’ts while mowing.
4. Excessive weight
Sometimes excessive weight can drag the mower deck into the ground. Many people make the mistake of carrying collection bags, mulching kits, or other accessories in the mower which ultimately creates extra pressure on the deck and the blade.
It results in the scalping of grass as well as the deck getting stuck in the ground. The symptom of excessive weight is visible when there is a drag while pushing or driving the mower over a lawn. Here’s what you can do to solve the issue.
Potential Fix
You may have already guessed what the solution to this problem is.
- Do not carry extra weight on the mower
- Do not put extra pressure while mowing
- Always check the tire pressure for optimum balancing
Read also: Mower Discharge Chute Up Or Down – [Comprehensive Guide]
Frequently Asked Questions (FAQs)
Well that covers all the basic reasons why the Mower Deck Digging into Ground. Now let’s look at some of the common queries regarding the same.
How do I know if my mower deck height is set correctly?
Check the height adjustment lever or dial on the mower to set the deck height. Most mowers also have an indicator marking that shows the height of the mower deck. For more clarification, you can check out this video.
How often should I sharpen my mower blade?
Mower blades should be sharpened regularly to ensure even cutting. As a general rule of thumb, sharpen the blades at least once every mowing season or more frequently if you notice a decrease in cutting performance.
Can I use my mower on wet grass?
It is recommended not to use a mower on wet grass. That is because wet grass tends to clump together. It also prevents an even cutting of the grass.
